Can EXTRALUBE ZX1 Micro Oil Metal Treatment help the fuel economy and reduce exhaust emissions?
"Yes it can, EXTRALUBE ZX1 Micro Oil Metal Treatment is a Friction Eliminator that makes engines work more efficiently this leads to less carbon exhaust emissions and so reduces your carbon footprint.
It is designed to form an extremely hard wearing substrate film which has no perceivable measurable thickness and will not build on itself to compromise design tolerances, because ZX1 is totally non particulate it can be used universally in all systems, it does not mix with the engine oil, but simply uses it as a carrier to find the wearing metal surfaces.
It is this technology that reduces friction in the engine thus the oil does not have to work so hard which ultimately results in reduced carbon exhaust emissions. Many of our customers use EXTRALUBE ZX1 Micro Oil Metal Treatment purely for this benefit.
In 1992 when our company was formed the prime function of EXTRALUBE ZX1 Micro Oil Metal Treatment was to provide a friction eliminator as an effective lubricating medium to cope with the demands of engineering in the 20th Century and improve component life.
It soon became apparent that this reduced friction in engines and transmissions increased the mpg, some quite considerably; this endorsement is echoed by our many customers who are now buying EXTRALUBE ZX1 Micro Oil Metal Treatment for this reason alone.
Testimonials to back up this statement
"My car had failed the MOT (exhaust emission test), but within a few minutes of using “Extralube ZX1” it passed with flying colours”!
Mr J.W Dent, Oakhill Garage, Sheffield
E & L Distribution in Coventry tell us in January 2012 - Daf LF 45 Truck with 3.9 Litre diesel engines saves 1 Litre of diesel every 100kms driven when treated with Extralube ZX1
C. Blacklor (emailed us)from Surrey - "I am writing to say how pleased I am with the purchase of your Extralube ZX1 and I have noticed a big difference in my petrol consumption on the motorway run. It has gone from approximately 32 MPG to 38MPG at 70 MPG and I have put it in the engine to see if it does the same job as with the petrol. I would recommend it to anybody".
Dave Medhurst (emailed us) - "I added EXTRALUBE ZX1 Micro Oil Metal Treatment to the engine oil and what a difference it made. The engine is quieter, smoother and now the onboard computer is giving a reading of 52MPG - 4 miles per gallon above the Ford figures. A truly remarkable product”
East Sussex County Council told us – "The authority has been using ZX1 friction reducing oil for approximately 2 years as a remedial expedient in the event of excessive oil consumption and high exhaust emissions. The introduction of the product has produced the desired immediate effect."
MOT exhaust emissions test results, pre and post EXTRALUBE ZX1 Micro Oil Metal Treatment
VECHICLE: VAUXHALL: VEHICLE MODEL: CORSAENGINE CAPACITY: 1.2
MOT 24/12/1999 BEFORE ZX1 Treatment MOT 1/12/2000 AFTER ZX1 Treatment
Fast Idle Test Pass Fast Idle Test Pass
Engine Speed 3087 rpm Pass Engine Speed 2800-3200rpm Pass
CO Level at 3087 rpm 0.23% Pass CO Level 0.00% Pass
Natural Idle Test Pass Natural Idle Test Pass
Engine Speed 921 rpm Pass Engine Speed 0790 – 1050 rpm Pass
CO Level at 921 rpm 0.06 % Pass CO Level 0.00% Pass
Monday-Friday: 9am to 5pm
Saturday: 10am to 2pm
Team ZX1 Ltd
Telephone 01892 669828
Fax 01892 669832
Kager Industriproduckte GmBH
Singapore - South East Asia
Contact: Benny Oentoro
Contact: Edmond Lee
Contact: Dennis Chiang
Contact: Dan Dela Cruz Ramos
Contact: Ike Ekejiuba / Ben Ekejiuba
Australia and New Zealand
Contact: John Grullis
Contact: Andrew Doig
Contact: AlDanah Corporation
Copyright 2017. All Rights Reserved